0 of 14 Questions completed
Questions:
You have already completed the review before. Hence you can not start it again.
Review is loading…
You must sign in or sign up to start the review.
You must first complete the following:
0 of 14 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Manual activation of kitchen automatic fire extinguishing systems is required. At least one activation device must be located a minimum of _____________________ feet from the kitchen appliance being protected.
When commercial kitchen cleaning company removes a duct access panel for cleaning, they must __________________.
When is it acceptable to close of linen and/or garbage chute?
Interior finish includes ____________________
Flame-spread rating requirements are contained in ___________________ primarily to regulate interior finishes.
________________________ are a quality-focused process that provides assurance that the fire protection systems in the building are installed and function as designed.
One of the reasons the fire inspector should also be involved in the construction phase of a building is
The Building Code establishes a satisfactory standard of fire, life and health safety for the design and construction and alteration of buildings. The Fire Code establishes an acceptable standard for fire and life safety for buildings in use. The two codes are intended to be
Occupant loads determined under the building code and the fire code will likely be different since they are determined for different reasons. The fire code occupant load
If a building is equipped with an automatic sprinkler system, it must have a __________________ located on the outside of the building.
An exit route consists of three parts, Exit Access, Exit, and Exit Discharge. An Exit is :
If the building is equipped with hose stations, there should be___________________.
Grease removal devices must be __________for use with the cooking appliances.
All exhaust system components including the fan must be accessible or have removable access panels for_______________.